ideal-tek 65A.SA镊子具有0.15mm精细弯尖头，可在狭小空间精细夹持操作金丝细线、微芯片等小物体，30度弯头设计具有良好的操作视野不会被前方遮挡，低碳奥氏体材质具有非磁性及耐高温耐酸特性，全长140mm，swiss made瑞士制造。
瑞士ideal-tek镊子SWISS MADE品质，齐全的规格和新颖的设计在业界享负盛名，材质涵盖碳纤维、陶瓷、抗磁性耐酸不锈钢(SA)、高碳钢(S)、碳钢(C) 和镍铬钼合金(NC)、钛(TA)、黄铜(BR)等，广泛应用于微电子、钟表珠宝、显微外科学、光学、军工及航空航天等领域。ideal-dek 65A.SA镊子尖头宽0.15mmx0.07mm厚度，30°斜弯造型可在狭小空间进行精细操作并具有良好的操作视野不会被前方遮挡，奥氏体不锈钢材质具有良好耐腐蚀性和抗磁性，耐高温特性支持350摄氏度工作温度。
low carbon austenitic steel低碳奥氏体不锈钢SA，抗磁性、耐高温、耐酸，
含有16.5至18.5 wt％的铬，并含有大量的镍和钼作为其他合金元素，non-magnetizable (80%)不可磁化，非磁性
good corrosion resistance to most chemicals, salts and acids对大多数化学品，盐和酸具有良好的耐腐蚀性，通常用于主要要求耐腐蚀性和韧性的场合
Hardness 230HV维氏硬度（≈18HRC洛氏硬度），Continuos use temperature 350℃工作温度350度
typical applications include tweezers for the electronic industry, watch-makers, jewellers and laboratory and medical applications in moderately aggressive chemical environments典型的应用包括在中等侵蚀性化学环境中的电子行业用、钟表匠、珠宝商以及实验室和医疗应用
其它材质
Carbon steel type C碳钢：高硬度60HRC，用于需要高强度及硬度场合，耐温300℃，可磁化，耐腐蚀性差会生锈
Stainless steel type S马氏体高碳钢：硬度59HRC耐腐蚀性低于SA，一般强度硬度及温和环境用，耐温300℃，可磁化
Diamond coated DC金刚石涂层：99HRC超高硬度涂层用于处理坚硬材料，高弹性极高耐磨性、耐高温350℃防静电
| 型号 | 尖头尺寸(B宽度x厚度A) | 长度 | 说明及扩展 |
| 0.SA | 0.15mm x 0.10mm | 120mm | flat edges, fine tips 直细尖头、边缘平整 |
| 00.SA镊子粗硬 | 0.90mm x 0.50mm | 120mm | strong, flat edges, thick 坚固厚实头部、边缘平整 |
| 000.SA | 0.20mm x 0.15mm | 120mm | strong, flat radiused edges, fine 坚硬精密尖头、圆角平滑边缘 |
| 00B.SA | 0.90mm x 0.55mm | 120mm | same as 00 with serrated grips 同00号但带锯齿握把 |
| 00D.SA尖头带锯齿 | 0.90mm x 0.45mm | 120mm | same as 00, serrated tips and grips 同00号，握把和尖头带锯齿 |
| 0C9.SA镊子 | 0.15mm x 0.10mm | 90mm，开口6mm | short, flat edges, fine 短细尖头、边缘平坦，扩展型0C9.S高碳钢 |
| 1.SA | 0.15mm x 0.10mm | 120mm |
strong, straight, fine 坚硬精密尖直头 1.S马氏体高碳钢、1.NC镍铬钼高温合金、1.TA钛合金 |
| 2.SA | 0.15mm x 0.05mm | 120mm | flat, sharp fine tips锋利尖头、边缘平整，扩展2.S、2.NC、2.BR |
| 2A.SA平头镊子 | 1.90mm x 0.10mm | 120mm |
flat, accurate round tips扁圆头、边缘平滑 扩展型号2A.S、2A.NC、2A.TA |
| 2AB.SA弯头 | 1.90mm x 0.10mm | 120mm | as 2A, curved 与2A相同，弯头，扩展型号2AB.TA钛合金材质 |
| 3.SA镊子 | 0.15mm x 0.10mm | 120mm，开口8mm | very sharp, fine 非常锋利细尖头，其他材质扩展型号3.S、3.NC、3.TA，涂层3.SA.NE、3.SA.DC类金刚石镀层超硬尖头 |
| 3C.SA精密镊子 | 0.20mm x 0.10mm | 110mm，开口8mm |
as 3, short 同3号镊子，短剑尖头 3C.S高碳钢、3C.NC高温合金、3C.TA钛合金 |
| 3CB.SA弯头 | 0.20mm x 0.10mm | 110mm，张开5mm | as 3C, bent tips同3C号，弯头 |
| 3F.SA弯头镊子 | 0.25mm x 0.05mm | 120mm | double bent上下双弯头，very fine, pointed, superior finish非常细 |
| 4.SA | 0.10mm x 0.08mm | 110mm | extra fine tips 超细尖头，扩展型号4.S、4.TA |
| 4A.SA | 0.35mm x 0.15mm | 110mm | as 4, stronger 同4号，更粗硬 |
| 5.SA超细镊子 | 0.10mm x 0.06mm | 110mm，开口6mm |
extra fine tips, superior finish超细精密尖头 扩展型号5.S、5.NC、5.TA |
| 5A.SA弯头镊子 | 0.13mm x 0.08mm | 115mm |
extra fine tips, superior finish超细精密尖头，头部微弯曲5度 扩展型号5A.S、5A.NC |
| 5B.SA | 0.10mm x 0.06mm | 110mm | as 5, bent tips for max visibility 同5号，前端弯头良好的可视性 |
| 5C.SA | 0.10mm x 0.07mm | 115mm | as 5A, extra fine, double bent tips 同5A，两次弯头 |
| 5TTH.SA | 0.14mm x 0.09mm | 110mm | anti capillary, extra fine, with lock-ring for handling electronic microscope grids 用于处理电子显微镜网格，超精细 |
| 6.SA | 0.18mm x 0.08mm | 115mm | flat angled, fine 精细弯斜角尖头 |
| 7.SA弯头镊子 | 0.16mm x 0.09mm | 115mm，开口8mm |
very fine, curved 鹰嘴弯尖头 7.S、7.NC、7.TA |
| 7A.SA | 0.26mm x 0.15mm | 115mm | as 7, strong 同7号，坚固尖头 |
| 7B.SA | 0.19mm x 0.14mm | 115mm | as 7, serrated tips 同7号，弯头尖部内含锯齿 |
| 10G.SA | 0.55mm x 0.45mm | 110mm | fine, serrated tips and grips 精密尖头内含锯齿，带齿手柄 |
| 11.N镍材质 | 0.20mm x 0.10mm | 120mm | straight, fine tips精密直尖头 |
|
15A.C碳钢镊剪 15AGW.C剪切镊子 15AP.C |
0.25mm直径软线切割 | 120mm |
cutting tweezers for soft copper, gold, silver, magnetic wires 剪切软铜线引脚，金丝银线，磁导线 用于受限空间剪切操作，不可剪合金硬线，只能剪低硬度软材质 |
| 27C.BR黄铜 | 0.30mm x 0.10mm | 130mm | strong, sharp, fine tips; precision brass tweezers黄铜材质，尖直头坚固平整，扩展型号27CL.BR镜面抛光 |
| 51S.SA弯头 | 0.15mm x 0.08mm | 115mm | as 5A, bent tips for max visibility，同5A，弯头避免挡住视线 |
| 775.SA.NE弯头 | 0.35mm x 0.20mm | 155mm | fine, bent tips ESD epoxy coated handles防静电环氧涂层 |
| AC.SA | 0.35mm x 0.15mm | 110mm | strong tips, serrated grips 坚硬尖头，锯齿握把 |
|
AM.BR、AM.BR.LA AML.BR铜镊子 |
0.35mm x 0.18mm | 125mm |
precision brass tweezers anti-sparking 精密黄铜，防火花 |
| F.SA方角平头 | 1.70mm x 0.08mm | 120mm | as 2A, flat and squared tips 同2A，但头部为90度方形直角 |
| 65A.SA镊子 | 0.15mm x 0.07mm | 140mm | very fine bent tips 精细弯曲长尖头 |
| SS.SA尖细镊子 | 0.12mm x 0.09mm | 140mm | extra fine tips超精密窄细尖头，扩展型号SS.S高碳钢、SS.NC超高温合金、SS.TA钛合金、SS.SA.DC金刚石涂层尖头 |
| K5HP.SA套装 | 高精度系列组套5把装 | 5支镊子带盒 | 00, 2A, 3C, 5, 7号组合套装，K5HP.S、K5HP.NC、K5HP.TA |
ideal-tek镊子规格资料文http://www.testeb.com/download/202002/ideal-tek_High_Precision_Tweezers.pdf
地址：深圳市龙华区民治街道民宝路南源商业大厦，手机：18823303057 农先生 邮箱：nbinghong@testeb.com 网站地图 sitemap.xml 手机版
